kas750
|
Rear setsCan you still get 'em?? Did anybody make 'em back in the day?...I would like some for my 400 but not as extreme as the one's on Bri's 350...
|
simonh
|
Re: Rear sets | kas750 wrote: | | Can you still get 'em?? Did anybody make 'em back in the day?...I would like some for my 400 but not as extreme as the one's on Bri's 350... | too be honest adrian mate, theyre the best i've seen. most have the footrest even closer to the rear mount
try them with flat bars, abfab mate
|
cabbie
|
Buy a cheap set off eBay and make some mounting plates.
|
g6mow
|
http://cgi.ebay.co.uk/KH400-KH250...f7f4d887&_trksid=p3286.c0.m14
|
180kid
|
look like Rask rearsets,, think you need a plate unless they fit in rear footpeg holes, dont know position of them,...
|
kas750
|
Nice one Si.I'm on to 'em.Any further ideas of how they may fi????
|
180kid
|
my old computor' has all the info you will ever need,...cant get it,
|
g6mow
|
| 180kid wrote: | look like Rask rearsets,, think you need a plate unless they fit in rear footpeg holes, dont know position of them,...  |
Look the ones on that 250 with the FLF kit I had.Remember it Bri with the grey spannies, at my old lock up. Rearsets were fitted to rear foot rests
|
180kid
|
i do Si,
full stretch, all weight pressed to front, did feel way too far back though, riding with feet on back pegs,. all uncomfy whatever you have,
these look the bollocks and should be able to mod position, nice find,
|
simonh
|
defo raask
just need to make a plate that spreads between rear footrest mount and front footrest mount, and mount the rear sets somewhere in the middle
Personally I dont run the linkage on the left side, even more slog than standard, just a rd or similiar gearchange backwards works fine
|
180kid
|
yup they need modding as fit is in the rear peg mounts,..ouch,
|
kas750
|
i'm out
|
180kid
|
£45 is an average price for nice rearsets,
|
kas750
|
Had decided that if i needed to mod them then i had might as well start from scratch with some from a breakers
|
simonh
|
| kas750 wrote: | Had decided that if i needed to mod them then i had might as well start from scratch with some from a breakers  |
dont have a linkage on the left mate, just a backwards lever, gears are the right way round too
|
180kid
|
| simonh wrote: | | kas750 wrote: | Had decided that if i needed to mod them then i had might as well start from scratch with some from a breakers  |
dont have a linkage on the left mate, just a backwards lever, gears are the right way round too  |
hehe, yes was pleasanlty surprised with the 350 when the gears was same order, not really a concern never thought about it,, but having differnt gears on all bikes i ride and my camper too which has a left HD column change ya' get used to what your riding pretty fast, christ even today i put 10quids of unleaded in my diesel van until i flooded it out with a further 40q of diesel, no probs..
|
|
|