bubba2
|
400 into 250I 'am wright in thinking a 400 motor will fit in a 250 frame with carbs and pipes off a 400 ? couse me thinks 250 won't be qwick enough. 
|
kas750
|
fair comment..you will need the loom and switchgear if the motor is from a kh400.If it's an s3 motor everything should be tickety boo....
|
bubba2
|
400 into 250Thanks for confirming i'll build up an s3 motor up and keep it simple as poss
|
The Wolfman
|
| kas750 wrote: | | fair comment..you will need the loom and switchgear if the motor is from a kh400.If it's an s3 motor everything should be tickety boo.... |
Or you can use the Generator from the 250 on the 400 engine if you don't want the messy swapping of harness and switchgear.
|
simonh
|
he's building up s3 motor, so all the same
cdi's are for homos is the new tune 
|
bricep59
|
nowt wrong with cdi's as long as your screw dont snap 
|
kas750
|
| simonh wrote: |
cdi's are for homos is the new tune |
|
bubba2
|
400 into 250cheers boys wot about tunning it !! ya or na
|
simonh
|
its a pretty quick motor when set up nice anyway, pistons are available now so you could be brave and tune it
|
yogi20
|
Re: 400 into 250 | bubba2 wrote: | | I 'am wright in thinking a 400 motor will fit in a 250 frame with carbs and pipes off a 400 ? couse me thinks 250 won't be qwick enough. |
nowt is ever quick enough 
|
The Wolfman
|
Re: 400 into 250 | yogi20 wrote: | | nowt is ever quick enough |
True, true, there's always a bit more power in there somewhere...
|
bubba2
|
400 into 250cheers boys will finish 250 first then i'll get a 400 motor and let you know.. 
|
|
|
