KAWASAKI KH & S SERIES FORUM

Yorkie · Joined: 31 Mar 2009 Posts: 3

Hi, I recently had to dissasemble the barrel to send off, to get a new key to made, whilst i know I should have taken pictures etc to make it easier when putting back together.

so if anyone can provide a detailed breakdown of the 3 components of the key barrell and how the 3 parts fit together ?

and also can anyone show me the 3 key positions and what they should do in pictures ?

bike is an S1-250 so i am not sure if the components are the same :P

The Wolfman · Posted: Thu Sep 17, 2009 8:18 am Post subject:

?

The rebuild of the switch should be self evident, they can only go together in one way.. if you look at the contacts on the plastic insert inside the lock you can see which way up it will mate correctly with the contacts on the rear plate.

Three positions are off, on and park, where only the tail light is on.
_________________
:
I used to be a Werewolf, but I'm alright Noooowwwwww!!

Yorkie · Joined: 31 Mar 2009 Posts: 3

yeah I wasn't too clear in it all was I, ah well will have another look at it this weekend and see if I can get some life into the electrics.

Thanks for your help @:)

scouse · Posted: Fri Sep 18, 2009 5:48 am Post subject:

where are you located?

when you say s1 do you mean 72 s1?

Gary T
_________________
Ride it like you stole it

Yorkie · Joined: 31 Mar 2009 Posts: 3

I will try to get pictures up of it, the frame and engine number point to it being a s1 the plate points to 72